Container Chassis and Trailers SKU AC-0130
2024 Griffin 7ft x 16ft Telescopic Tipper Trailer – 6.4t with Ramps
- Condition
- New
- Availability
- In stock
- Australia-wide delivery$745 per unit in the standard service area, shown at checkout
- Processing 1–3 business daysDelivery typically 4–7 business days after processing
- 18 months warrantyAustralian Consumer Law rights unaffected
- Bank transfer or cardCard is paid through a secure link on your tax invoice; unit prepared after payment is confirmed
Key specifications
Technical summary
ISO reference dimensions; values marked approx. vary slightly by production batch. Ask us to confirm any critical measurement before ordering.
Product overview
A three-stage telescopic lift is the difference between a dump body that empties and one that half-empties. Scissor lifts run out of angle with a sticky load; a telescopic ram keeps pushing the front of the body up until everything slides. On wet clay, mulch or road base, that is not a small thing. This Griffin GT-716/TELE pairs it with a two-way combination spreader and barn gate, so you can tip a heap or trickle a spread from the same trailer. Build details 10 gauge smooth steel walls and floor with front and rear gussets sized for wall extensions Five 5,000 lb D-rings welded into the floor 2,032 mm C-channel fender-mounted ramps 12 V DC hydraulic pump, power up and power down, with a deep cycle marine battery Control box with front access, 3-piece plug-and-play wiring harness Tandem EZ lube axles with galvanised components on equalised leaf springs Tarp kit mounting brackets fitted, 406 mm radial tyres, high gloss black powder coat Ratings Gross 14,000 lb (about 6,350 kg), tare 4,855 lb (about 2,202 kg), rated payload 9,145 lb (about 4,148 kg). Model GT-716/TELE, black, new. Australian registration These are converted US manufacturer figures, offered for comparison only. No ADR compliance, ATM rating or roadworthiness is claimed – your state or territory road authority handles approval and registration of imported trailers, and that is the first call to make. The full range is under container chassis and trailers , with covered alternatives under enclosed trailers .Customisation
Personnel doors, windows, electrical fit-outs, lighting, insulation, air conditioning, shelving, lockboxes, flooring, internal lining, partitions and plumbing can be specified through a quote. Tell us how the unit will be used and we will confirm what suits it.
Custom solutionsDelivery
Delivery is coordinated Australia-wide from the Port Macquarie. Processing takes 1–3 business days; delivery is typically 4–7 business days after processing. The standard charge is $745 per unit (incl. GST) within our standard service area and is shown at checkout once you enter your postcode. Remote, restricted-access, multi-unit and oversize deliveries are confirmed by quotation.
Tilt tray: A straight run behind the placement point (typically about 2.5× the container length plus the truck), firm level ground and clear overhead height. The most common option for 6ft–20ft units: the tray tilts and the container slides off onto the ground.
Side loader: Clear space along one side of the truck for the stabiliser legs and the two lifting cranes, and room to park parallel to the drop. Lifts the container off the chassis and sets it down beside the vehicle; the usual choice for 20ft and 40ft units.
Hiab / crane truck: Firm ground for the outriggers and a placement point within the crane's reach. Suits sites where the unit has to go over a fence or into a corner a tilt tray cannot reach; reach depends on the crane model and the unit weight.
Illustrative only. Figures are typical; we confirm the vehicle and access with you before dispatch.
Site access
Before delivery, check for a firm, level placement area, clear truck access and turning room, gate width, overhead power lines and trees, and soft ground after rain. A tilt tray typically needs a straight run behind the placement point; side loaders need clear space along one side. Our team confirms the right vehicle with you before dispatch.
Warranty
New units carry an 18 months voluntary warranty from delivery against manufacturing and structural defects. Your rights under the Australian Consumer Law are not limited by this warranty. Warranty policy · Returns
Compare
Related units
2024 Diamond C 7ft x 24ft Tilt Deck Plant Trailer – 9.1t with Spare Mount
2024 Mission 101in x 12ft Aluminium 2-Place Side-by-Side Trailer with Canopy
2024 Mission 101in x 24ft Aluminium 4/5-Place Deckover ATV Trailer, Galvanised
