Container Chassis and Trailers SKU AC-0134
2024 N&N 7ft x 14ft Galvanised Hydraulic Tipper Trailer – 6.4t with Tarp Kit
- Condition
- New
- Availability
- In stock
- Australia-wide delivery$745 per unit in the standard service area, shown at checkout
- Processing 1–3 business daysDelivery typically 4–7 business days after processing
- 18 months warrantyAustralian Consumer Law rights unaffected
- Bank transfer or cardCard is paid through a secure link on your tax invoice; unit prepared after payment is confirmed
Key specifications
Technical summary
ISO reference dimensions; values marked approx. vary slightly by production batch. Ask us to confirm any critical measurement before ordering.
Product overview
Galvanising is the headline here. Axles, rims, ramps, spare rim – the components that normally rot first on a dump trailer are all galvanised, which in a coastal Australian yard or a wet-weather civil job changes the service life substantially. The lift is a 12-tonne three-stage telescopic cylinder, which empties a sticky load properly rather than leaving half of it stuck against the headboard. Built into it 2 x 7,000 lb electric brake galvanised axles on slipper spring suspension 51 x 152 x 6 mm rectangular tube frame with reinforced spring hangers Crossmembers at 406 mm centres, 584 mm high sides inside the box 1,829 mm galvanised undermount ramps Dual-action rear door and a 5-position adjustable coupler Tarp and roller with an aluminium tarp protector Aluminium toolbox, four welded D-rings, plank holders, stabiliser legs Heat shrink connectors, cold weather harness and a 1.5 A smart battery charger Ratings Manufacturer’s gross 14,000 lb (about 6,350 kg), dry weight 4,200 lb (about 1,905 kg), rated payload 9,800 lb (about 4,445 kg). Fitted with a spare tyre on a galvanised rim and a spare mount. New, 2024. Compliance in Australia Those are US manufacturer figures converted here for reference and carry no ADR, ATM or roadworthiness meaning. Approval and registration of imported trailers is handled by your state or territory road authority. The rest of the range sits under container chassis and trailers ; for secure on-site storage of the same materials, see our Australian container price guide .Customisation
Personnel doors, windows, electrical fit-outs, lighting, insulation, air conditioning, shelving, lockboxes, flooring, internal lining, partitions and plumbing can be specified through a quote. Tell us how the unit will be used and we will confirm what suits it.
Custom solutionsDelivery
Delivery is coordinated Australia-wide from the Port Macquarie. Processing takes 1–3 business days; delivery is typically 4–7 business days after processing. The standard charge is $745 per unit (incl. GST) within our standard service area and is shown at checkout once you enter your postcode. Remote, restricted-access, multi-unit and oversize deliveries are confirmed by quotation.
Tilt tray: A straight run behind the placement point (typically about 2.5× the container length plus the truck), firm level ground and clear overhead height. The most common option for 6ft–20ft units: the tray tilts and the container slides off onto the ground.
Side loader: Clear space along one side of the truck for the stabiliser legs and the two lifting cranes, and room to park parallel to the drop. Lifts the container off the chassis and sets it down beside the vehicle; the usual choice for 20ft and 40ft units.
Hiab / crane truck: Firm ground for the outriggers and a placement point within the crane's reach. Suits sites where the unit has to go over a fence or into a corner a tilt tray cannot reach; reach depends on the crane model and the unit weight.
Illustrative only. Figures are typical; we confirm the vehicle and access with you before dispatch.
Site access
Before delivery, check for a firm, level placement area, clear truck access and turning room, gate width, overhead power lines and trees, and soft ground after rain. A tilt tray typically needs a straight run behind the placement point; side loaders need clear space along one side. Our team confirms the right vehicle with you before dispatch.
Warranty
New units carry an 18 months voluntary warranty from delivery against manufacturing and structural defects. Your rights under the Australian Consumer Law are not limited by this warranty. Warranty policy · Returns
Compare
Related units
2024 Diamond C 7ft x 24ft Tilt Deck Plant Trailer – 9.1t with Spare Mount
2024 Griffin 7ft x 16ft Telescopic Tipper Trailer – 6.4t with Ramps
2024 Mission 101in x 12ft Aluminium 2-Place Side-by-Side Trailer with Canopy
