Container Chassis and Trailers SKU AC-0137
2024 PJ Trailers 7ft x 14ft Open Utility Trailer with ATV Side Loading Ramps
- Condition
- New
- Availability
- In stock
- Australia-wide delivery$745 per unit in the standard service area, shown at checkout
- Processing 1–3 business daysDelivery typically 4–7 business days after processing
- 18 months warrantyAustralian Consumer Law rights unaffected
- Bank transfer or cardCard is paid through a secure link on your tax invoice; unit prepared after payment is confirmed
Key specifications
Technical summary
ISO reference dimensions; values marked approx. vary slightly by production batch. Ask us to confirm any critical measurement before ordering.
Product overview
The side loading ramps are what make this PJ different from every other 7×14 open trailer. Instead of only being able to load from the rear, ATV ramps let you drive a quad or a mower on from the side, which is the difference between using the trailer and manoeuvring around it in a tight shed or yard. Removable side rails on the Ready Rail system mean the deck can be run completely flat when you need to carry something wide or overhanging. Configuration 2,108 mm deck width, 50 mm treated pine decking 1.22 m fold-down rear ramp gate plus ATV side loading ramps 51 x 51 mm removable side rails and top rail Single 3,500 lb leaf spring idler axle on 381 mm black mod wheels 102 mm channel frame with a 102 mm channel wrapped tongue 2 in A-frame coupler, 5,000 lb front swivel jack, spare tyre and mount Removable checker-plate guards, sealed wiring harness, flush-mount LED lights Ratings Gross 2,995 lb (about 1,359 kg), dry weight 1,565 lb (about 710 kg), rated payload 1,430 lb (about 649 kg). Powder coated black, new, 2024. Note the payload This is the idler-axle version, so the rated payload of roughly 649 kg is a good deal lower than the braked twin-axle model of the same size. That suits a single quad and gear; it does not suit a load of road base. Road use in Australia Those are US manufacturer ratings, converted. No ADR compliance, ATM rating or roadworthiness is claimed here. Approval and registration of an imported trailer runs through your state or territory road authority. More options are under container chassis and trailers and enclosed trailers .Customisation
Personnel doors, windows, electrical fit-outs, lighting, insulation, air conditioning, shelving, lockboxes, flooring, internal lining, partitions and plumbing can be specified through a quote. Tell us how the unit will be used and we will confirm what suits it.
Custom solutionsDelivery
Delivery is coordinated Australia-wide from the Port Macquarie. Processing takes 1–3 business days; delivery is typically 4–7 business days after processing. The standard charge is $745 per unit (incl. GST) within our standard service area and is shown at checkout once you enter your postcode. Remote, restricted-access, multi-unit and oversize deliveries are confirmed by quotation.
Tilt tray: A straight run behind the placement point (typically about 2.5× the container length plus the truck), firm level ground and clear overhead height. The most common option for 6ft–20ft units: the tray tilts and the container slides off onto the ground.
Side loader: Clear space along one side of the truck for the stabiliser legs and the two lifting cranes, and room to park parallel to the drop. Lifts the container off the chassis and sets it down beside the vehicle; the usual choice for 20ft and 40ft units.
Hiab / crane truck: Firm ground for the outriggers and a placement point within the crane's reach. Suits sites where the unit has to go over a fence or into a corner a tilt tray cannot reach; reach depends on the crane model and the unit weight.
Illustrative only. Figures are typical; we confirm the vehicle and access with you before dispatch.
Site access
Before delivery, check for a firm, level placement area, clear truck access and turning room, gate width, overhead power lines and trees, and soft ground after rain. A tilt tray typically needs a straight run behind the placement point; side loaders need clear space along one side. Our team confirms the right vehicle with you before dispatch.
Warranty
New units carry an 18 months voluntary warranty from delivery against manufacturing and structural defects. Your rights under the Australian Consumer Law are not limited by this warranty. Warranty policy · Returns
Compare
Related units
2024 Diamond C 7ft x 24ft Tilt Deck Plant Trailer – 9.1t with Spare Mount
2024 Griffin 7ft x 16ft Telescopic Tipper Trailer – 6.4t with Ramps
2024 Mission 101in x 12ft Aluminium 2-Place Side-by-Side Trailer with Canopy
