Container Chassis and Trailers SKU AC-0144
2024 Rice 7ft x 20ft Tilt Deck Plant Trailer – 7.3t with Spare Mount
- Condition
- New
- Availability
- In stock
- Australia-wide delivery$745 per unit in the standard service area, shown at checkout
- Processing 1–3 business daysDelivery typically 4–7 business days after processing
- 18 months warrantyAustralian Consumer Law rights unaffected
- Bank transfer or cardCard is paid through a secure link on your tax invoice; unit prepared after payment is confirmed
Key specifications
Technical summary
ISO reference dimensions; values marked approx. vary slightly by production batch. Ask us to confirm any critical measurement before ordering.
Product overview
Where the partial tilt keeps a fixed front section, this Rice PTHD20 tilts the whole deck. The entire 6.1 m becomes a continuous ramp to the ground, which is the easiest possible way to load a low-clearance or tracked machine – nothing to line up, nothing to lift, no transition to bottom out on. It runs 17.5 in LRJ tyres on twin 8,000 lb cambered EZ lube braked axles, which is a heavier tyre and axle package than the 14,000 lb models and gives it a useful margin under load. Specification Deck 7 ft x 20 ft (2.13 m x 6.1 m), full tilt Manufacturer gross rating 16,000 lb (approx. 7,257 kg) Dry weight 4,080 lb (approx. 1,851 kg) Rated payload 11,920 lb (approx. 5,407 kg) Axles 2 x 8,000 lb cambered EZ lube, electric brakes Coupler 2-5/16 in adjustable, 16,000 lb Jack 10,000 lb Frame 152 mm channel tongue and main frame, 76 mm crossmembers at 406 mm centres Condition New, 2024, black Full tilt: load placement matters On a full tilt deck the balance point is everything. Drive on far enough that the deck settles under the machine rather than needing to be pulled down, and secure the load before moving off. An integrated storage box in the neck keeps chains and binders where you need them. Compliance All figures are US manufacturer ratings converted here for comparison. They are not ADR ratings, an ATM plate or a roadworthiness statement; approval and registration of imported trailers runs through your state or territory road authority. See related trailers under container chassis and trailers and real container weights in our dimensions guide .Customisation
Personnel doors, windows, electrical fit-outs, lighting, insulation, air conditioning, shelving, lockboxes, flooring, internal lining, partitions and plumbing can be specified through a quote. Tell us how the unit will be used and we will confirm what suits it.
Custom solutionsDelivery
Delivery is coordinated Australia-wide from the Port Macquarie. Processing takes 1–3 business days; delivery is typically 4–7 business days after processing. The standard charge is $745 per unit (incl. GST) within our standard service area and is shown at checkout once you enter your postcode. Remote, restricted-access, multi-unit and oversize deliveries are confirmed by quotation.
Tilt tray: A straight run behind the placement point (typically about 2.5× the container length plus the truck), firm level ground and clear overhead height. The most common option for 6ft–20ft units: the tray tilts and the container slides off onto the ground.
Side loader: Clear space along one side of the truck for the stabiliser legs and the two lifting cranes, and room to park parallel to the drop. Lifts the container off the chassis and sets it down beside the vehicle; the usual choice for 20ft and 40ft units.
Hiab / crane truck: Firm ground for the outriggers and a placement point within the crane's reach. Suits sites where the unit has to go over a fence or into a corner a tilt tray cannot reach; reach depends on the crane model and the unit weight.
Illustrative only. Figures are typical; we confirm the vehicle and access with you before dispatch.
Site access
Before delivery, check for a firm, level placement area, clear truck access and turning room, gate width, overhead power lines and trees, and soft ground after rain. A tilt tray typically needs a straight run behind the placement point; side loaders need clear space along one side. Our team confirms the right vehicle with you before dispatch.
Warranty
New units carry an 18 months voluntary warranty from delivery against manufacturing and structural defects. Your rights under the Australian Consumer Law are not limited by this warranty. Warranty policy · Returns
Compare
Related units
2024 Diamond C 7ft x 24ft Tilt Deck Plant Trailer – 9.1t with Spare Mount
2024 Griffin 7ft x 16ft Telescopic Tipper Trailer – 6.4t with Ramps
2024 Mission 101in x 12ft Aluminium 2-Place Side-by-Side Trailer with Canopy
